Connect Tech JB2 User Manual

USERMANUALMODEL 1000RCAsynchronous ShortRange Modem: Dual Rack Mount CardSALES OFFICE(301) 975-1000TECHNICAL SUPPORT(301) 975-1007Part# 07M1000RC-BDo

1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 1000RC components to befree from defects, and will—at our option—repair or replace the

2.0 GENERAL INFORMATIONThank you for your purchase of this Patton Electronics product.This product has been thoroughly inspected and tested and iswar

3.2 FRONT CARD CONFIGURATION The Model 1000RC contains two sets of configuration straps whichallow you to set the function of “Carrier Detect” output

JB2Position 1&2 = Line A Shield Connected to Frame GroundPosition 2&3 = No ShieldJB4Position 1&2 = Line B Shield Connected to Frame

Switching the Power Supply On and OffThe power switch is located on the front panel. When plugged inand switched on, a red front panel LED will glow.

RJ-45 CableSIGNAL PIN# PIN# SIGNALGND†2-----------------------7 GND†RCV- 3-----------------------5 XMT-XMT+ 4-----------------------6 RCV+XMT- 5------

APPENDIX ASPECIFICATIONSTransmission Format: AsynchronousData Rate: 0 to 19.2 KbpsSurge Protection: 600W power dissipation at 1 mSControl Signal:

APPENDIX DINTERFACE SETTINGS & ORIENTATIONPATTON MODULAR INTERFACE - 10 Wire RJ-45Contact Number Circuit Description1 N/A Not Used2 125 DSR 3 109